Before You Brew

For best results, we strongly recommend starting with whole bean coffee and grinding with a burr grinder immediately before brewing. If you grind your coffee too soon, it will quickly lose many of the compounds that give it such delightful aromas and flavors.

Step 1

Pour water into your coffee maker’s reservoir.

Step 2

If using pre-ground coffee skip to Step 3. Otherwise, weigh out your whole bean coffee and grind it according to the type of filter you’re using. For flat-bottom filters, grind on a medium setting. For cone-shaped filters, grind on a slightly coarser setting. See our guide on how to grind your coffee for reference.

Step 3

Insert filter into the basket and pour your coffee into the filter. Return the basket to its position for brewing.

Step 4

Start the brew cycle.

Step 5

Allow brew cycle to finish, then immediately discard the coffee grounds. If you leave the filter in the basket after brewing is complete, coffee will continue to drip slowly through the grounds, which can turn your coffee bitter.